Thursday, December 18, 2014

Looking for feedback

Hi all! I am hoping to be doing more regular blogging in 2015 and was wondering what sorts of things you would like to see? Any weekly or monthly features that you think I should try?

Thanks!

Tuesday, December 9, 2014

Leather luxury

I have been wanting to make some statement pieces that people can look at and say “That’s by LethargicLass”. Maybe not quite Chanel, but close :) I also wanted to make something that was 100% my own pattern, where I didn’t have to search to find if I had permission to sell, something that was mine.IMG_0043I also wanted something that had a little something extra. I decided on leather. I had never sewn with it before but decided it couldn’t be that hard… and I was right!IMG_0049  I also have been collecting fabrics over the years knowing that one day they would become pouches, finally I am able to use them!IMG_0057These are extra large project bags. Perfect for bringing your EPP project to wine night at the friend’s house, or to bring your sketchbook to the coffee shop. They have an outside zip pocket, the main zipped interior, as well as a slip pocket on the inside. They are a generous 12” x 12” so can fit quite a bit!IMG_0053I find the leather adds structure while also making this a standout piece. IMG_0063 I have six listed in my shop at this moment and plan to add some more in the next little while. Let me know what you think!IMG_0066

Friday, November 28, 2014

Handmade for the Holidays

My favourite LQS, Mad About Patchwork, is having a special weekend both online and in store. There will be specials as well as lots of kits for easy to sew items for last minute gifts. In addition, Laura from Waffle Kisses Studio and I will be selling some of our own handmade wares at the retail location of MAP at 2477 Huntley Road, Stittsville from 10-4 tomorrow, Saturday the 29th.
I have been working away sewing up a storm and would love to see you there!
IMG_3641

Thursday, November 20, 2014

Simple Zipper Pouch Tutorial

After making the two-in-one pouches mentioned recently I realised that I felt completely confident to make any style of zipper pouch on my own. Consequently I have been making quite a few and was asked if I could share a tutorial on what works for me. There are a TON of photos but I wanted everything to be clear.
Materials:
(2) *Exterior fabric that will measure 5.5” x 9.5” (this can be one piece or patchwork, up to you, but cut it to 5.5” x 9.5” before proceeding.
(2) Lining fabric measuring 5.5” x 9.5”
(2) Lightweight fusible interfacing (Pellon SF101) measuring 5.5” x 9.5”
(2) Zipper tab ends measuring 1.5” x 2”
(1) Nylon zipper measuring no smaller than 10”
(1) label if you use them
Basting glue of some sort (Elmer’s school glue works) with a fine tip (not pictured)
IMG_3514
 IMG_3516This picture is to show that if you are piecing the exterior together and want to cars to be on the right side of the pouch no matter which way it is facing, then you have to put the pieces together opposite from each other. 
IMG_3515Apply your label to one of the inside pieces if you wish.
IMG_3517IMG_3518  IMG_3519IMG_3521
Take your zipper ends and fold in half with the short ends together. Apply two small lines of glue close to the middle and fold the ends into the middle. Iron to set the glue.
IMG_3522
Take your zipper and mark at Zero and at 8.5” anywhere as long as both marks are inside of the manufacturer’s stop ends. You can make your pouch any size as long as your zipper ends up being 1 inch shorter than the length of your pouch.
 IMG_3523
Open your zipper at this point past the first line.
 IMG_3524 IMG_3525
Carefully sew across the zipper 1/8” towards to middle from your first line. Cut your extra off on the line. (See why moving the zipper pull is so important? A huge pain if you forget lol)
IMG_3526 IMG_3527 IMG_3528
Slide the end into the zipper tab and stitch 1/8” along the bottom edge. Carefully trim the ends even with the zipper. Repeat for the other side and your zipper should be looking like this.
 IMG_3529 IMG_3530
Place your lining face up and lay your zipper face up on top with the pull on the right hand side. Roll the zipper towards you so that you are looking at the wrong side and apply a line of glue to the long side closest to you.
IMG_3531
Put the zipper back on the top of the lining and carefully run your iron along the edge to seal.
IMG_3532 IMG_3533
Run a long line of glue along the top of the lining/zipper piece and lay your exterior piece right side down. Carefully iron the edge to set the glue.
IMG_3534
As you see here I am not using a zipper foot, only my 1/4” foot. Simply place the glued edge under the foot and sew with a 1/4” seam. When you get to the end keep your needle down and raise your presser foot. Carefully wiggle the zipper pull back down to where you have already sewn. As long as your needle is down you should have no problem. I took some pictures later on to try and explain.
 IMG_3535 IMG_3536
Carefully iron both your lining and your exterior away from the zipper to prepare for topstitching.
 IMG_3537 IMG_3538
Have your zipper pull in the middle and start topstitching about 1/8” down from the fold. Stop with needle down when you get to the zipper pull.
IMG_3539 IMG_3540IMG_3541
Lift up your presser foot and maneuver the zipper pull back along the sewn edge, sometimes swinging the fabric around helps, the needle down ensures that you won’t skip any stitches. Lower your presser foot and finish top stitching.
 IMG_3542 IMG_3543
Place a line of glue along the raw edge on the wrong side of the zipper and line your zipper edge with the top edge of the second piece of lining.
IMG_3544  IMG_3532
Iron down the zipper, and do another long line of glue along the top. Place your exterior piece on top and iron to seal it.
IMG_3534 IMG_3545
Once again use your 1/4” foot to sew along the 1/4” seam, maneuvering the zipper pull as required. Iron away from the zipper and topstitch down that side. NOW OPEN YOUR ZIPPER HALF WAY! (That was important in case you couldn’t tell lol)
IMG_3547 IMG_3548
Pin the lining to lining right sides together with a 3-4”
gap, and pin the exterior to exterior sides together, no gap. Make sure that the seam faces the lining side. Sew all around, backstitching at the beginning and end of the gap. I am still using just my 1/4” foot here. It gets a little tricky when you reach the middle, but just go slowly and it will work. I always backstitch 1-3 stitches at the end and beginning of each corner to ensure its strength when I am poking corners out later.
 IMG_3551 IMG_3552
Turn the pouch inside out through the gap left in the lining and use a chopstick to make your corners sharp and to make your zipper tabs look good.
 IMG_3553
Sew the gap closed.
IMG_3554
Give it one last ironing and voila, your pouch is done! If you have any questions, ask away :) I hope this works for you!

Tuesday, November 18, 2014

Some recent makes

I have been sewing away lately even if I have been remiss about blogging about it. First up is a first time pattern from a blogger I admire very much, Svetlana of Sotak Handmade. I actually had the honour of sending to Svetlana for her very first Flickr swap a long time ago, the Pretty Little Pouch Swap. I remember wanting to make sure her first experience was fun and I hope I did that LOL!IMG_3467The pattern is the Two In One Pouch and you can read about it here. I highly recommend it! IMG_3466 I added some inside slip pockets to mine.IMG_3471And one last gorgeous one made from my favourite fabric line, Hadley!

Yesterday I finished a new tunic top I had been wanting to make for awhile. It was my first time sewing with knits and it was a great experience, plus, I absolutely love the finished top! The pattern is The Laurel Dress/Tunic by Green Style Creations.IMG_3481 Hope you enjoyed seeing my projects!